DeatschWerks 60# Injectors - Set of 4 - Ecotec

This is a set of (4) 60#/630cc DeatschWerks injectors for your modified LSJ, LE5, L61, or any port injected Ecotec platform car. DeatschWerks injectors are dynamically flow matched, leak tested, and balanced before shipping. These injectors are the based around the most modern Bosch architecture and tune easier/better than previous generation injectors. 

These injectors require an EV6 injector harness on an LSJ, found here. No injector harness is needed for 2.2/2.4 cars. 

60#/630cc injectors are the perfect size for supercharged cars on gas. These injectors are not large enough to support E85 on an M62 or TVS1320. They can support low boost on some turbo setups. If you have any questions regarding injector size, please email [email protected] for LSJ and [email protected] for 2.2/2.4. 

• Static Flow Rate @ 43.5PSI (300kPa) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
• Connector style: USCAR/EV6
• High Impedance
• Minimum Injector Pulse-width: 0.2446ms
• Series: EV14
• Factory fitted with Viton upper and lower o-rings
• Compatible with all fuel types

PCM programming is required whenever your injector size is changed. These injectors are currently limited to email remote tuning only, we cannot do core flashes at this time.

Sold in sets of 4.